Product Information
Product code: SK-TXS80 Category: Tripod & SupportRM2,090.00
Product Highlights :
- 22″ of Slider Travel
- 22-Pound Payload
- Flywheel Belt-Drive System
- Adjustable Resistance
- Remove Flywheel for Standard Operation
- Extendable Carbon Fiber Rails
- 1/4″-20 and 3/8″-16 Tripod Threads
- 5/8″ Receiver for C-Stands, Light Stands
- Individually Adjustable Outrigger Feet
Description
Create cinematic camera movements with 22″ of travel when using the Sevenoak Carbon Fiber Slider Pro. It features a belt-drive with flywheel system and offers adjustable resistance via two additional bearings on the carriage. The carriage also features a locking knob to hold it in place on the rails. For tripod and stand usage, there are standard 1/4″-20 and 3/8″-16 threads on the bottom, as well as a 5/8″ stand mount receiver built-into the removable track ends (tube fixers).
The flywheel adds inertia to your slider, providing smooth starts and stops. It features a removable handle so you can either “crank” the flywheel or spin it without the handle to drive the slider. In addition, you can easily remove the flywheel if you wish to move the slider without the flywheel. The carbon fiber rails feature threaded ends that enable extending the length by attaching extension rails (not included). The outrigger feet are mounted on the track ends and are individually adjustable for leveling the slider on uneven surfaces.
- Key Features
-
- 22″ of slider travel
- Supports up to 22 pounds of payload
- Flywheel belt-drive system
- Adjustable resistance
- 1/4″-20 and 3/8″-16 tripod threads
- 5/8″ stand mount receivers for C-stands and baby stands
- Individually adjustable outrigger feet
-
- Adjustable rollers help minimize lateral movement for heavier rigs
Related Products
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.
Manfrotto 460MG 3D Magnesium Camera Head RC2
Product Highlights :
- An innovative 3D head
- The head can be positioned in virtually any position to get the exact framing of the 0 image
- The rubber grip knobs provide finger tip control
Specifications :
- Attaches By : 1/4 attachment type
- Front Tilt : -30° / 180° tilt range
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 3 kg
- Weight : 0.43 kg
- Working Height : 10.5 cm
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto 494RC2 Mini Ball Head with RC2
Product Highlights :
- Small
- Light
- With quick release
- Perfect for amateur's point and shooot activities
Specifications :
- Attaches By : 3/8" female thread attachment type
- Lateral Tilt : -90° / 90° head tilt
- Panoramic Rotation : 360 °
- Plate Type : 200PL-14
- Load Capacity : 4 kg
- Weight : 0.32 kg
- Working Height : 8.5 cm
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Manfrotto 230 Tripod Snow Shoes
Product Highlights:
-
The Manfrotto 230 (3255) is a set of 3 5.5" diameter (14cm) All Weather Tripod Shoes.
-
Snap these all-weather shoes onto your tripod legs and be set for snow, sand or other irregular surfaces.
-
Shoes attach easily and provide the stability needed.
Tripod Mount Ring D for Canon EF 100mm f/2.8L IS USM Macro Lens
Product Highlights :
- Specifically designed for Canon EF 100mm/F2.8L IS USM Macro Lens (not suitable for the non-L model)
- By using a tripod mount ring, you can take better pictures as the mounting ring provide better balance and stabilization
- The ring holds the lens more securely than if the camera is mounted on the tripod
- Made of a lightweight metal that matches the colour of the lens
- The mount ring is very helpful in extreme close-up photography
Manfrotto MT190CXPRO4 Carbon Fiber Tripod
Product Highlights :
- 90° column helps you get the perfect shot every time
- Easily link your camera tripod with accessories
- Smooth movements with leg angle selector
- Rapidly set up thanks to quick power locking
- Crafted to Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 1.65 kg
- Material : Carbon Fiber
- Bubble Level : 1
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
(OFFER) Manfrotto 500PLONG Video Camera Plate
Product Highlights :
- Made in aluminum
- 1/4'' and ¼’’ to 3/8''adapter included
- Removable Anti-Rotation Pin
- Rubber Grip Strips
- Specifications:
- Weight : 0.12 kg
- Material : Aluminium
- Height : 1cm
- Length : 12cm
- Width : 5cm