Sevenoak DSLR cage SK-C03 is a portable aluminum cage kit built for the most DSLR cameras which adds protection, stability and mounting options to the camera. It includes removable top hand grip, Mini HDMI to HDMI adapter cable, HDMI plug protector, quick release base plate, cold shoes, 1/4”and 3/8” mounting points etc.
DSLR cage SK-C03 allows full access to the camera’s controls, buttons, battery and SD card slot. The built in 1/4” and 3/8” mounting points and two cold shoes on the top hand grip enables users to mount various kinds of useful accessories.
The HDMI plug protector avoids wearing out or damaging the camera Mini HDMI port by repeated plugging in and out of the Mini HDMI cable. It also helps to prevent your HDMI cable from accidentally coming unplugged during a shoot which is particularly important when using an external monitor or recorder.
The quick release baseplate design and top hand grip enable users to mount it on a tripod easily or carrying it with hand for different shooting requirement.
Sevenoak also includes extra side frames for use with a DSLR and battery grip combination.
Removable top hand grip
Quick release plate
Built in 1/4” and 3/8” mounting points
Built in cold shoes
A pair of 15mm standard rods
Full access to camera’s controls, buttons, memory slot and battery
Compatible with most DSLRs and even DSLRs with battery grip
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models: - D4, D3S, D800-series, D600, D300S - D7100, D7000, D5200, D5100, D3200 - CoolPix P7700, P7100, P7000 - Nikon V1, V2 - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
- Nikon Stereo Microphone ME-1
- Carrying Case
- Miyamondo 1-Year Warranty
- Shoot from new perspectives thanks to the 90° column system
- Effortless setup thanks to the Quick Power Lock
- Add an accessory via the East Link
- Leg angle selectors guarantee smooth movement
- Accurate framing on 3 axes thanks to the XPRO 3Way head
- Specifications: - Load Capacity : 6kg - Maximum Height : 173 cm - Minimum Height : 8 cm - Weight : 3.1 kg - Material : Aluminum - Quick Release : Yes - Camera Mount Thread Size : 1/4"-20 - Tripod Mount Thread Size : 3/8"-16 - Bubble Level : Yes - Independent Pan Lock : Yes - Independent Tilt Lock :Yes
- This product is covered by 2-Year Manfrotto Warranty
- Shoot from all angles with a 90° rotating camera tripod
- Set up quickly and securely thanks to Quick Power Lock
- Pair easily with your accessories
- Individual leg control provides smooth, sure movement
- Made to meet Italy’s world-class quality standards
- Specifications: - Load Capacity : 7 kg - Height : 160cm - Weight : 2 kg - Material : Aluminum - Bubble Level : 1
- This product is covered by 2-Year Manfrotto Warranty
- Made in aluminum
- 1/4'' and ¼’’ to 3/8''adapter included
- Removable Anti-Rotation Pin
- Rubber Grip Strips
- Specifications: - Weight : 0.12 kg - Material : Aluminium - Height : 1cm - Length : 12cm - Width : 5cm
- Two Tilt Drag Settings
- Fixed Pan Drag
- Separate Pan and Tilt Locks
- QR Plate
- 3 Section, 2 Stage Aluminum Legs
- Four Pre-Set Locking Positions
- Easy Link Accessory Port
- Specifications: - Load Capacity : 7kg - Maximum Height : 170 cm - Minimum Height : 19 cm - Folded : 69 cm - Weight : 2.7 kg - Material : AdaptoTechnopolymer , Aluminum - Quick Release : Yes, 200PL - Camera Mount Thread Size : 1/4"-20 - Tripod Mount Thread Size : 3/8"-16 - Bubble Level : Yes - Independent Pan Lock : Yes - Independent Tilt Lock :Yes
This Product is Covered by 2-Year Manfrotto Warranty
- This mini tripod is a tripod stand that works great with gimbal stabilizer like Zhiyun, Feiyu, DJI Osmo, so to release your hands for freely video shooting or photography.
- A tripod stand also for selfie stick-universal, can be easily installed on selfie stick, stand on table or floor to use.
- It is both tripod & handle grip , very easy to fold up or open.
- With the tripod stand, you can get stable shooting, no shaking any more.
- Super lightweight, suitable for all kinds occasions, like live streaming/traveling/interviewing etc.
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications: - Weight : 0.28Kg - Material : Aluminium - Height : 2.35cm - Length : 10cm - Width : 9cm
- 22" of Slider Travel
- 22-Pound Payload
- Flywheel Belt-Drive System
- Adjustable Resistance
- Remove Flywheel for Standard Operation
- Extendable Carbon Fiber Rails
- 1/4"-20 and 3/8"-16 Tripod Threads
- 5/8" Receiver for C-Stands, Light Stands
- Individually Adjustable Outrigger Feet
- Leg angle adjustment lock ensures single adjustment of each leg
- 4-section column leg with quick release locks, giving a more convenient leg handling, satisfying your wanted height when shooting
- The center axis inverted function ensures you lowest shooting
- Equip with steel rocker, you can adjust the panhead during the shooting
- Design a handle to lift the axis, more convenient to use
- Non-slip rubber feet
- A portable pocket makes it easy to carry
- Best choice for SLR camera in your travel
- Specifications : Material: Aluminum alloy tube+ABS environmental plastic Material of the handle: ABS environmental plastic Head type: Pan head Folded length: 50 cm / 19.7 in (with ballhead) Tripod max height: 145cm / 4.92ft Max. tube diameter: 20mm / 0.8in Column quantity: 4 sections Load capacity: 3kg