Sevenoak DSLR cage SK-C03 is a portable aluminum cage kit built for the most DSLR cameras which adds protection, stability and mounting options to the camera. It includes removable top hand grip, Mini HDMI to HDMI adapter cable, HDMI plug protector, quick release base plate, cold shoes, 1/4”and 3/8” mounting points etc.
DSLR cage SK-C03 allows full access to the camera’s controls, buttons, battery and SD card slot. The built in 1/4” and 3/8” mounting points and two cold shoes on the top hand grip enables users to mount various kinds of useful accessories.
The HDMI plug protector avoids wearing out or damaging the camera Mini HDMI port by repeated plugging in and out of the Mini HDMI cable. It also helps to prevent your HDMI cable from accidentally coming unplugged during a shoot which is particularly important when using an external monitor or recorder.
The quick release baseplate design and top hand grip enable users to mount it on a tripod easily or carrying it with hand for different shooting requirement.
Sevenoak also includes extra side frames for use with a DSLR and battery grip combination.
Removable top hand grip
Quick release plate
Built in 1/4” and 3/8” mounting points
Built in cold shoes
A pair of 15mm standard rods
Full access to camera’s controls, buttons, memory slot and battery
Compatible with most DSLRs and even DSLRs with battery grip
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models: - D4, D3S, D800-series, D600, D300S - D7100, D7000, D5200, D5100, D3200 - CoolPix P7700, P7100, P7000 - Nikon V1, V2 - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
- Nikon Stereo Microphone ME-1
- Carrying Case
- Miyamondo 1-Year Warranty
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.
- Made in aluminum
- 1/4'' and ¼’’ to 3/8''adapter included
- Removable Anti-Rotation Pin
- Rubber Grip Strips
- Specifications: - Weight : 0.12 kg - Material : Aluminium - Height : 1cm - Length : 12cm - Width : 5cm
- Portable, lightweight, solid and affordable monopod
- Quick release leg lock
- Non slip rubberfoot and nail foot changeable for different condition
- Ideal for outdoor, travel and timer shoots
- Material : Aluminum Alloy
- Sections : 4
- Max Diameter : 26.8mm
- Max Height : 1710mm
- Min Height : 540mm
- Folded Height : 540mm
- Load Capacity : 3kg
- 3 way aluminium head designed to allow both still photography and video application
- Equipped with a quick release plate system and Teflon pads
- The bar is padded with soft not-slip rubber
- Attaches By : 1/4 attachment type
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 5 kg
- Weight : 0.57 kg
- Working Height : 9.5 cm
- Shoot from all angles with a 90° rotating camera tripod
- Set up quickly and securely thanks to Quick Power Lock
- Pair easily with your accessories
- Individual leg control provides smooth, sure movement
- Made to meet Italy’s world-class quality standards
- Specifications: - Load Capacity : 7 kg - Height : 160cm - Weight : 2 kg - Material : Aluminum - Bubble Level : 1
- This product is covered by 2-Year Manfrotto Warranty
- Two Tilt Drag Settings
- Fixed Pan Drag
- Separate Pan and Tilt Locks
- QR Plate
- 3 Section, 2 Stage Aluminum Legs
- Four Pre-Set Locking Positions
- Easy Link Accessory Port
- Specifications: - Load Capacity : 7kg - Maximum Height : 170 cm - Minimum Height : 19 cm - Folded : 69 cm - Weight : 2.7 kg - Material : AdaptoTechnopolymer , Aluminum - Quick Release : Yes, 200PL - Camera Mount Thread Size : 1/4"-20 - Tripod Mount Thread Size : 3/8"-16 - Bubble Level : Yes - Independent Pan Lock : Yes - Independent Tilt Lock :Yes
This Product is Covered by 2-Year Manfrotto Warranty
- Capture any shot with 90° column system
- Secure, fast quick power lock
- Easy link makes connecting camera tripod accessories simple
- Smooth movements thanks to leg angle selector
- Made to world-class Italian quality standards
- Specifications: - Load Capacity : 7 kg - Height : 160cm - Weight : 2.1 kg - Material : Aluminum - Bubble Level : 1
This Product is Covered by 2-Year Manfrotto Warranty
- Leg angle adjustment lock ensures single adjustment of each leg
- 4-section column leg with quick release locks, giving a more convenient leg handling, satisfying your wanted height when shooting
- The center axis inverted function ensures you lowest shooting
- Equip with steel rocker, you can adjust the panhead during the shooting
- Design a handle to lift the axis, more convenient to use
- Non-slip rubber feet
- A portable pocket makes it easy to carry
- Best choice for SLR camera in your travel
- Specifications : Material: Aluminum alloy tube+ABS environmental plastic Material of the handle: ABS environmental plastic Head type: Pan head Folded length: 50 cm / 19.7 in (with ballhead) Tripod max height: 145cm / 4.92ft Max. tube diameter: 20mm / 0.8in Column quantity: 4 sections Load capacity: 3kg