Product Information
Product code: SK-SW03N Categories: stabiliser &gimbals, Tripod & SupportRM830.00
Product Highlights :
- Fine adjustment Camera Balance Platform
- Integrated quick-release Camera Plate
- Adjustable convergence, precision, three axis gimbal
- Adjustable dynamic balance and inertial control Base Platform
Description
The Sevenoak stabilizer SK-SW03N is a lightweight, hand-held camera stabilizer system designed for DSLR cameras weighing up to 1.5KG. This system works so well that it allows you to get that incredibly smooth, graceful and steady shot even while going to extremes like running up and down stairs.
The camera platform moves back and forth, and side to side, to quickly allow you to adjust the cameras horizontal balance. By varying the amount of counterweight disks on the base platform, you adjust the camera’s vertical balance. When balanced properly the camera floats, always balanced, isolated from your hands undesirable motions and ready for you to move into action.
Related Products
Manfrotto 468MGRC4 Hydrostatic Ball Head with RC4
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported Medium format, Pro SLR
Load Capacity 35.3 lb (16 kg)
Height 4.7" (11.9 cm)
Quick Release Yes
Spirit Level Yes (horizontal & vertical)
Tension Control Yes
Tripod Mount Thread Size 3/8"-16
Weight 1.6 lb (725 g)
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head MKBFRA4R-BH (Red)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto MT190XPRO4 190XPRO Aluminium 4-Section Camera Tripod
Product Highlights :
- Capture any shot with 90° column system
- Secure, fast quick power lock
- Easy link makes connecting camera tripod accessories simple
- Smooth movements thanks to leg angle selector
- Made to world-class Italian quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2.1 kg
- Material : Aluminum
- Bubble Level : 1
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto MH293D3-Q2 3-Way Photo Head with Compact Foldable Handles (290 series)
Product Highlights :
- Strong and Lightweight
- Handles Fold Flat for Transport
- Quick Release with Camera Plate
- 360 Degree Panning
- 90 / -30° Front and Lateral Tilt
- 3 Bubble Levels
Specifications :
- Construction Technopolymer
- Type Pan/Tilt
- Quick Release Yes, with 200PL-14 plate
- Head Mount Thread Size 3/8"-16
- Spirit Level x3
- Panning Range 360 Degrees
- Tilt 90 / -30°
- Operating Temperature -4.0 to 140°F (-20 to 60°C)
- Height 3.54" (9.0 cm)
- Load Capacity 8.82 lb(4.0 kg)
- Weight 1.26 lb (0.570 kg)
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto 230 Tripod Snow Shoes
Product Highlights:
-
The Manfrotto 230 (3255) is a set of 3 5.5" diameter (14cm) All Weather Tripod Shoes.
-
Snap these all-weather shoes onto your tripod legs and be set for snow, sand or other irregular surfaces.
-
Shoes attach easily and provide the stability needed.
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto MK190X3-2W 190X Aluminium 3-Section Tripod with XPRO Fluid Head
Product Highlights :
- Two Tilt Drag Settings
- Fixed Pan Drag
- Separate Pan and Tilt Locks
- QR Plate
- 3 Section, 2 Stage Aluminum Legs
- Four Pre-Set Locking Positions
- Easy Link Accessory Port
- Specifications:
- Load Capacity : 7kg
- Maximum Height : 170 cm
- Minimum Height : 19 cm
- Folded : 69 cm
- Weight : 2.7 kg
- Material : AdaptoTechnopolymer , Aluminum
- Quick Release : Yes, 200PL
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto MKCOMPACTADV-BK Compact Advanced Aluminium Tripod with 3-Way Head (Black)
Product Highlights :
- Reinforced aluminium for outstanding rigidity
- Easy to carry thanks to its compact, fold-away levers
- Quick-release plate so you can frame and shoot quickly
- Extends to a superior height of 165cm
- Includes padded carrying back for maximum portability
- Specifications:
- Load Capacity : 3 kg
- Height : 165cm
- Weight : 1.42 kg
- Material : Aluminum,Technopolymer
- Quick Release : Yes
- Independent Pan Lock : No
- Independent Tilt Lock : No
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
Manfrotto 468MGRC2 Hydrostatic Ball Head with RC2
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported : Medium format
Load Capacity : 22 lb (10 kg)
Height : 4.7" (11.9 cm)
Quick Release : Yes
Spirit Level : No
Tension Control : Yes
Tripod Mount Thread Size : 3/8"-16
Weight : 1.4 lb (635 g)
Spikes : No
Head Type : None
Head Mount Thread Size : 3/8"-16
Weight : 5.3 lb (2.4 kg)