Product Information
Product code: SK-LS85 Category: Tripod & SupportRM630.00
Product Highlights :
- Use on a tripod or on a flat surface with included feet
- Adjustable and foldable feet
- Creates high-quality production shots
- Anodized aluminum construction
- With 1/4” and 3/8” screw holes on the rail
Description
The Sevenoak Camera Slider SK-LS85 is designed to give you the ability to create good-quality production shots without over-extending your budget. Featuring heavy-duty anodized aluminum construction, super-smooth glide rail, spirit level & tension adjustment, the camera Slider SK-LS85 gives you the best value. It can be attached directly to a tripod and may also be used standalone with the included feet, which raises your camera setup approximately 2″ off the ground. The camera slider SK-LS85 is suitable for amateur cameras, professional cameras as well as for cameras with the function of recording movies (for example Canon 7D, Canon 5D Mark2, Canon 60D,Canon 500D~550D,Nikon D3100,D7000,Sony A55 etc)
Features:
Dimension (LxWxH): 85cmx9cmx7cm
Sets up in minutes
Super-smooth glide rail
Super-smooth sliding plate with bearings
Tension adjustment/locking knob
Spirit Level
Use on a tripod or on a flat surface with included feet
Adjustable and foldable feet
Creates high-quality production shots
Anodized aluminum construction
With 1/4” and 3/8” screw holes on the rail
Related Products
Weifeng WT-1003 Monopod
Product Highlights :
- Portable, lightweight, solid and affordable monopod
- Quick release leg lock
- Non slip rubberfoot and nail foot changeable for different condition
- Ideal for outdoor, travel and timer shoots
- Material : Aluminum Alloy
- Sections : 4
- Max Diameter : 26.8mm
- Max Height : 1710mm
- Min Height : 540mm
- Folded Height : 540mm
- Load Capacity : 3kg
Manfrotto MMCOMPACT-BK Compact Photo Monopod (Black)
Product Highlights :
- Comfortable, rounded rubber handgrip
- Protective cap for securing thread when transporting monopod
- Wrist strap to protect your equipment from damage
- At 330g, the lightest Manfrotto monopod
- Specifications:
- Load Capacity : 1.5 kg
- Height : 145cm
- Weight : 0.32 kg
- Material : Aluminum,Technopolymer
- Quick Release : No
Manfrotto MH293D3-Q2 3-Way Photo Head with Compact Foldable Handles (290 series)
Product Highlights :
- Strong and Lightweight
- Handles Fold Flat for Transport
- Quick Release with Camera Plate
- 360 Degree Panning
- 90 / -30° Front and Lateral Tilt
- 3 Bubble Levels
Specifications :
- Construction Technopolymer
- Type Pan/Tilt
- Quick Release Yes, with 200PL-14 plate
- Head Mount Thread Size 3/8"-16
- Spirit Level x3
- Panning Range 360 Degrees
- Tilt 90 / -30°
- Operating Temperature -4.0 to 140°F (-20 to 60°C)
- Height 3.54" (9.0 cm)
- Load Capacity 8.82 lb(4.0 kg)
- Weight 1.26 lb (0.570 kg)
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto MT190X3 190X Aluminium 3-Section Camera Tripod
Product Highlights :
- Easy Link attachment for different accessories
- Maximise your creativity with ultra-low shooting positions
- Consistently fast set up with four leg angles
- Robust and long-lasting
- Comfortable QPL levers for easy grip
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Weifeng WF593H Ball Head
Product Highlights :
- 3/8" screw socket at the bottom of the ballhead
- Full metal ballhead
- Quick release shoe
- Made with high quality material
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head (Grey)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Manfrotto 468MGRC2 Hydrostatic Ball Head with RC2
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported : Medium format
Load Capacity : 22 lb (10 kg)
Height : 4.7" (11.9 cm)
Quick Release : Yes
Spirit Level : No
Tension Control : Yes
Tripod Mount Thread Size : 3/8"-16
Weight : 1.4 lb (635 g)
Spikes : No
Head Type : None
Head Mount Thread Size : 3/8"-16
Weight : 5.3 lb (2.4 kg)
Buffalo M32 Monopod
Product Highlights :
- Aluminium Construction
- Comfortable foam padded grip for easy and secure handling
- Level leg locks for fast easy set up
- Sections : 3
- Max Height : 1580mm
- Min Height : 530mm