Product Information
Product code: SK-GH02 Categories: stabiliser &gimbals, Tripod & SupportRM1,050.00
Product Highlights :
- Can be mounted to tripods via the built-in 3/8” screw hole at the bottom
- With Arca-Swiss-compatible quick plate
- Swings smoothly and safely
- Height adjustable platform
- Fits virtually any telephoto lens with a rotation collar
- Made by carbon fiber and Aluminum
Description
Sevenoak Carbon Fiber Gimbal Head SK-GH02 is a carbon fiber gimbal-type tripod head designed for large telephoto lenses and DSLR cameras. It incorporates an elevated tilt mechanism and adjustable platform that makes the camera/lens’ center of gravity and tilt axis of the head be perfectly aligned. Its gimbal-type design allows you to rotate your lens around its center of gravity and thus easily manipulate very large lenses. With separate locks for 360 degree panning base and swinging arm, the SK-GH02 is ideal for shooting sporting events, birds in flight, or other fast moving subjects.
Related Products
Manfrotto 468MGQ6 Hydrostatic Ball Head
Product Highlights :
- Supports 35.27 lb
- Magnesium Alloy Construction
- Weighs Just 1.76 lb
- Hydraulic Locking System
- Includes Quick Release
- 3 Spirit Levels
- -90 to 90 Degree Tilt Range
- Specifications:
Construction Magnesium alloy
Tripod Attachment 3/8"-16
Friction Control Yes
Independent Pan Lock Yes
Lateral Tilt -90° / 90°
Panoramic Rotation 360 Degrees
Quick Release Yes, with secondary safety system
Camera Plate 1/4"-20
Spirit Level Yes, x3
Load Capacity 35.27 lb (16 kg)
Height 5.12" (13 cm)
Weight 1.76 lb (0.8 kg)
-
This Product is Covered by 2-Year Manfrotto Warranty
Tripod Mount Ring D for Canon EF 100mm f/2.8L IS USM Macro Lens
Product Highlights :
- Specifically designed for Canon EF 100mm/F2.8L IS USM Macro Lens (not suitable for the non-L model)
- By using a tripod mount ring, you can take better pictures as the mounting ring provide better balance and stabilization
- The ring holds the lens more securely than if the camera is mounted on the tripod
- Made of a lightweight metal that matches the colour of the lens
- The mount ring is very helpful in extreme close-up photography
Video Camera Monopod 4 Section
Product Highlights :
- Portable, lightweight and affordable monopod
- Ideal for outdoor, travel and timer shoots
- Sections : 4
Manfrotto 391RC2 Photo/Video Pan & Tilt Head
Product Highlights :
- 3 way aluminium head designed to allow both still photography and video application
- Equipped with a quick release plate system and Teflon pads
- The bar is padded with soft not-slip rubber
Specifications :
- Attaches By : 1/4 attachment type
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 5 kg
- Weight : 0.57 kg
- Working Height : 9.5 cm
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto 468MGRC2 Hydrostatic Ball Head with RC2
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported : Medium format
Load Capacity : 22 lb (10 kg)
Height : 4.7" (11.9 cm)
Quick Release : Yes
Spirit Level : No
Tension Control : Yes
Tripod Mount Thread Size : 3/8"-16
Weight : 1.4 lb (635 g)
Spikes : No
Head Type : None
Head Mount Thread Size : 3/8"-16
Weight : 5.3 lb (2.4 kg)
(OFFER) Manfrotto 500PLONG Video Camera Plate
Product Highlights :
- Made in aluminum
- 1/4'' and ¼’’ to 3/8''adapter included
- Removable Anti-Rotation Pin
- Rubber Grip Strips
- Specifications:
- Weight : 0.12 kg
- Material : Aluminium
- Height : 1cm
- Length : 12cm
- Width : 5cm
Manfrotto 468MGRC4 Hydrostatic Ball Head with RC4
Product Highlights :
- Designed to meet the demands of professional photographers who require a light weight head but at the same time want to support heavy camera loads up to 22 lb.
- Uses a hydraulic system to lock the ball mechanism in place.
- To keep weight low, the head is made of magnesium; and to provide smooth movements the 2" aluminum ball is Teflon coated.
- Offers a range of handy features: independent pan and tilt locks with a 360° pan movement; 90/-90° tilt movement; a graduated engraved panoramic base; and a calibrated adjustable friction control on the main knob.
- Specifications
Maximum Camera Supported Medium format, Pro SLR
Load Capacity 35.3 lb (16 kg)
Height 4.7" (11.9 cm)
Quick Release Yes
Spirit Level Yes (horizontal & vertical)
Tension Control Yes
Tripod Mount Thread Size 3/8"-16
Weight 1.6 lb (725 g)
Manfrotto 562B-1 Fluid Video Monopod with Sliding Plate
Product Highlights:
- Towering maximum height for flawless overhead shooting
- Features a fluid cartridge to facilitate smooth pans
- Ball joint guarantees expert ground levelling on any terrain
- Retractable feet for smooth and stable movements
- 357 quick release plate that balances camera payloads
- Specifications:
- Load Capacity : 8 kg
- Height : 193cm
- Weight : 2.08 kg
- Material : Aluminium
- Quick Release : Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty