“Manfrotto 035C Universal Super Clamp with ratchet handle” has been added to your basket. View basket
Sevenoak SK-GH01 Gimbal Tripod Head
Product Information
Product code: SK-GH01 Categories: stabiliser &gimbals, Tripod & SupportRM530.00
Product Highlights :
- Weights 1.4KG
- Can be mounted to tripods via the built-in 3/8” screw hole at the bottom
- Max dimensions (HxWxD): 23.5×8.9×24.7cm
- Without quick release clamp
- Built with dial indicator on its arm
- Swings smoothly and safely
- Height adjustable platform
- Fits virtually any telephoto lens with a rotation collar
Description
Description
Sevenoak Gimbal Tripod Head SK-GH01 is a specialized gimbal-type tripod head designed for telephoto lenses. It incorporates an elevated tilt mechanism and adjustable platform that makes the camera/lens’ center of gravity and tilt axis of the head be perfectly aligned. Its gimbal-type design allows you to rotate your lens around its center of gravity and thus easily manipulate very large lenses.
Related Products
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
Manfrotto 577 Quick Release Adapter with Sliding Plate 501PL
Product Highlights:
- The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
- It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
- Change supports without disassembling your camera
- Includes a safety lock for extra security
- Quick release system for fast and easy set up
- Easily pair with a variety of camera plates
- This clever adapter includes universal screws
- Specifications:
- Weight : 0.28Kg
- Material : Aluminium
- Height : 2.35cm
- Length : 10cm
- Width : 9cm
Manfrotto MK190XPRO4-3W 190 Aluminium 4-Section Tripod with Head
Product Highlights :
- Shoot from new perspectives thanks to the 90° column system
- Effortless setup thanks to the Quick Power Lock
- Add an accessory via the East Link
- Leg angle selectors guarantee smooth movement
- Accurate framing on 3 axes thanks to the XPRO 3Way head
- Specifications:
- Load Capacity : 6kg
- Maximum Height : 173 cm
- Minimum Height : 8 cm
- Weight : 3.1 kg
- Material : Aluminum
- Quick Release : Yes
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto MH293D3-Q2 3-Way Photo Head with Compact Foldable Handles (290 series)
Product Highlights :
- Strong and Lightweight
- Handles Fold Flat for Transport
- Quick Release with Camera Plate
- 360 Degree Panning
- 90 / -30° Front and Lateral Tilt
- 3 Bubble Levels
Specifications :
- Construction Technopolymer
- Type Pan/Tilt
- Quick Release Yes, with 200PL-14 plate
- Head Mount Thread Size 3/8"-16
- Spirit Level x3
- Panning Range 360 Degrees
- Tilt 90 / -30°
- Operating Temperature -4.0 to 140°F (-20 to 60°C)
- Height 3.54" (9.0 cm)
- Load Capacity 8.82 lb(4.0 kg)
- Weight 1.26 lb (0.570 kg)
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head (Grey)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 562B-1 Fluid Video Monopod with Sliding Plate
Product Highlights:
- Towering maximum height for flawless overhead shooting
- Features a fluid cartridge to facilitate smooth pans
- Ball joint guarantees expert ground levelling on any terrain
- Retractable feet for smooth and stable movements
- 357 quick release plate that balances camera payloads
- Specifications:
- Load Capacity : 8 kg
- Height : 193cm
- Weight : 2.08 kg
- Material : Aluminium
- Quick Release : Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Buffalo M32 Monopod
Product Highlights :
- Aluminium Construction
- Comfortable foam padded grip for easy and secure handling
- Level leg locks for fast easy set up
- Sections : 3
- Max Height : 1580mm
- Min Height : 530mm
Weifeng WT-1003 Monopod
Product Highlights :
- Portable, lightweight, solid and affordable monopod
- Quick release leg lock
- Non slip rubberfoot and nail foot changeable for different condition
- Ideal for outdoor, travel and timer shoots
- Material : Aluminum Alloy
- Sections : 4
- Max Diameter : 26.8mm
- Max Height : 1710mm
- Min Height : 540mm
- Folded Height : 540mm
- Load Capacity : 3kg
Manfrotto 230 Tripod Snow Shoes
Product Highlights:
-
The Manfrotto 230 (3255) is a set of 3 5.5" diameter (14cm) All Weather Tripod Shoes.
-
Snap these all-weather shoes onto your tripod legs and be set for snow, sand or other irregular surfaces.
-
Shoes attach easily and provide the stability needed.