Product Information
Product code: SK-C03 Category: Tripod & SupportRM790.00
Product Highlights :
- Aluminum Armor Cage
- 1/4″-20 & 3/8″-16 Mounting Points
- Mini HDMI to HDMI Adapter Cable & Mount
- Top Handle with 2 Cold Shoes
- 15mm LWS Support Rods
- Quick Release from 15mm Rods
- Wood-Lined Grip
Description
Sevenoak DSLR cage SK-C03 is a portable aluminum cage kit built for the most DSLR cameras which adds protection, stability and mounting options to the camera. It includes removable top hand grip, Mini HDMI to HDMI adapter cable, HDMI plug protector, quick release base plate, cold shoes, 1/4”and 3/8” mounting points etc.
DSLR cage SK-C03 allows full access to the camera’s controls, buttons, battery and SD card slot. The built in 1/4” and 3/8” mounting points and two cold shoes on the top hand grip enables users to mount various kinds of useful accessories.
The HDMI plug protector avoids wearing out or damaging the camera Mini HDMI port by repeated plugging in and out of the Mini HDMI cable. It also helps to prevent your HDMI cable from accidentally coming unplugged during a shoot which is particularly important when using an external monitor or recorder.
The quick release baseplate design and top hand grip enable users to mount it on a tripod easily or carrying it with hand for different shooting requirement.
Sevenoak also includes extra side frames for use with a DSLR and battery grip combination.
Features:
Aluminum construction
Removable top hand grip
Quick release plate
Built in 1/4” and 3/8” mounting points
Built in cold shoes
A pair of 15mm standard rods
Full access to camera’s controls, buttons, memory slot and battery
Compatible with most DSLRs and even DSLRs with battery grip
Related Products
Manfrotto 468MGQ6 Hydrostatic Ball Head
Product Highlights :
- Supports 35.27 lb
- Magnesium Alloy Construction
- Weighs Just 1.76 lb
- Hydraulic Locking System
- Includes Quick Release
- 3 Spirit Levels
- -90 to 90 Degree Tilt Range
- Specifications:
Construction Magnesium alloy
Tripod Attachment 3/8"-16
Friction Control Yes
Independent Pan Lock Yes
Lateral Tilt -90° / 90°
Panoramic Rotation 360 Degrees
Quick Release Yes, with secondary safety system
Camera Plate 1/4"-20
Spirit Level Yes, x3
Load Capacity 35.27 lb (16 kg)
Height 5.12" (13 cm)
Weight 1.76 lb (0.8 kg)
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto MK190XPRO4-3W 190 Aluminium 4-Section Tripod with Head
Product Highlights :
- Shoot from new perspectives thanks to the 90° column system
- Effortless setup thanks to the Quick Power Lock
- Add an accessory via the East Link
- Leg angle selectors guarantee smooth movement
- Accurate framing on 3 axes thanks to the XPRO 3Way head
- Specifications:
- Load Capacity : 6kg
- Maximum Height : 173 cm
- Minimum Height : 8 cm
- Weight : 3.1 kg
- Material : Aluminum
- Quick Release : Yes
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto 562B-1 Fluid Video Monopod with Sliding Plate
Product Highlights:
- Towering maximum height for flawless overhead shooting
- Features a fluid cartridge to facilitate smooth pans
- Ball joint guarantees expert ground levelling on any terrain
- Retractable feet for smooth and stable movements
- 357 quick release plate that balances camera payloads
- Specifications:
- Load Capacity : 8 kg
- Height : 193cm
- Weight : 2.08 kg
- Material : Aluminium
- Quick Release : Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto MT190CXPRO4 Carbon Fiber Tripod
Product Highlights :
- 90° column helps you get the perfect shot every time
- Easily link your camera tripod with accessories
- Smooth movements with leg angle selector
- Rapidly set up thanks to quick power locking
- Crafted to Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 1.65 kg
- Material : Carbon Fiber
- Bubble Level : 1
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto MH293D3-Q2 3-Way Photo Head with Compact Foldable Handles (290 series)
Product Highlights :
- Strong and Lightweight
- Handles Fold Flat for Transport
- Quick Release with Camera Plate
- 360 Degree Panning
- 90 / -30° Front and Lateral Tilt
- 3 Bubble Levels
Specifications :
- Construction Technopolymer
- Type Pan/Tilt
- Quick Release Yes, with 200PL-14 plate
- Head Mount Thread Size 3/8"-16
- Spirit Level x3
- Panning Range 360 Degrees
- Tilt 90 / -30°
- Operating Temperature -4.0 to 140°F (-20 to 60°C)
- Height 3.54" (9.0 cm)
- Load Capacity 8.82 lb(4.0 kg)
- Weight 1.26 lb (0.570 kg)
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto BeFree Compact Travel Aluminium Tripod with Ball Head (Grey)
Product Highlights :
-
Compact, light and portable tripod ideal as a travel companion.
-
A high quality tripod that fits into carry-on luggage and backpacks.
-
Maximum Height: 144cm
-
Minimum Height: 34cm
-
4 Leg Sections
-
Independent Leg Spread
-
Quick Release Ball Head
-
Weight: 1.4kg
-
Load Capacity: 4kg
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 460MG 3D Magnesium Camera Head RC2
Product Highlights :
- An innovative 3D head
- The head can be positioned in virtually any position to get the exact framing of the 0 image
- The rubber grip knobs provide finger tip control
Specifications :
- Attaches By : 1/4 attachment type
- Front Tilt : -30° / 180° tilt range
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 3 kg
- Weight : 0.43 kg
- Working Height : 10.5 cm
Manfrotto MT190XPRO3 190XPRO Aluminium 3-Section Camera Tripod
Product Highlights :
- Shoot from all angles with a 90° rotating camera tripod
- Set up quickly and securely thanks to Quick Power Lock
- Pair easily with your accessories
- Individual leg control provides smooth, sure movement
- Made to meet Italy’s world-class quality standards
- Specifications:
- Load Capacity : 7 kg
- Height : 160cm
- Weight : 2 kg
- Material : Aluminum
- Bubble Level : 1
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto 323 Quick Change Rectangular Plate Adapter (200PL)
Product Highlights :
- The Manfrotto 323 RC2 System Quick Release Adapter with 200PL-14 Plate adds a compact quick release system to any head that does not include one yet.
- Its compact 200PL-14 (old part #3157N) quick release plate makes it ideal for use with point and shoot cameras, digital SLR cameras, or spotting scopes.
- The 323 adapter allows quick mounting and dismounting of the camera from the tripod head.
- A 3/8"-16 threaded socket with a 1/4"-20 reducer bushing makes it compatible with any tripod head.