“Manfrotto MT190XPRO3 190XPRO Aluminium 3-Section Camera Tripod” has been added to your basket. View basket
Manfrotto Befree One Travel Tripod (Black) MKBFR1A4B-BH
Product Information
Product code: MKBFR1A4B-BH Category: Tripod & SupportRM730.00
Product Highlights :
- Load Capacity: 2.5kg
- Max Height: 130cm
- Min Height: 49cm
- Folded Length: 32cm
- Leg Sections: 4
- Weight: 1.3kg
- Aluminum Construction
- Flip Locks
- Single Action Ball Head
- 200PL Quick Release Plate Included
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Related Products
Manfrotto 460MG 3D Magnesium Camera Head RC2
Product Highlights :
- An innovative 3D head
- The head can be positioned in virtually any position to get the exact framing of the 0 image
- The rubber grip knobs provide finger tip control
Specifications :
- Attaches By : 1/4 attachment type
- Front Tilt : -30° / 180° tilt range
- Lateral tilt : -90° / 90° head tilt
- Panoramic Rotation : 360°
- Plate Type : 200PL-14
- Load Capacity : 3 kg
- Weight : 0.43 kg
- Working Height : 10.5 cm
Weifeng WT-1003 Monopod
Product Highlights :
- Portable, lightweight, solid and affordable monopod
- Quick release leg lock
- Non slip rubberfoot and nail foot changeable for different condition
- Ideal for outdoor, travel and timer shoots
- Material : Aluminum Alloy
- Sections : 4
- Max Diameter : 26.8mm
- Max Height : 1710mm
- Min Height : 540mm
- Folded Height : 540mm
- Load Capacity : 3kg
Weifeng WF593H Ball Head
Product Highlights :
- 3/8" screw socket at the bottom of the ballhead
- Full metal ballhead
- Quick release shoe
- Made with high quality material
Manfrotto 494RC2 Mini Ball Head with RC2
Product Highlights :
- Small
- Light
- With quick release
- Perfect for amateur's point and shooot activities
Specifications :
- Attaches By : 3/8" female thread attachment type
- Lateral Tilt : -90° / 90° head tilt
- Panoramic Rotation : 360 °
- Plate Type : 200PL-14
- Load Capacity : 4 kg
- Weight : 0.32 kg
- Working Height : 8.5 cm
Warranty :
-
This product is covered by 2-Year Manfrotto Warranty
Manfrotto 498RC4 Midi Ball Head with RC4
Product Highlights :
- Die-cast aluminum, strong enough to support an SLR camera with a medium lens, and light medium format cameras.
- It has a single repositionable locking lever for 360° panoramic rotation and ±90° tilt movemen
- Cameras are attached to the ball head with the 410PL Plate and RC4 Quick Release Plate with 1/4'' male threads.
- The head to tripod attachment has 3/8'' female threads.
- The Quick Release Plate has a safety system to prevent an accidental detaching from the head.
- Specifications:
Load Capacity 17.64 lb (8 kg)
Ball Sphere Diameter Not Specified by Manufacturer
Quick Release CR4
Spirit Level Yes
Tension Control Yes
Rotating Head 360°
Tripod Mount Thread Size
3/8" female thread (bottom)
1/4" screw (attachment)
Plate 410PL
Height 5.31" (134.87mm)
Tilt Lateral: ±90°
Weight 1.54 lb (0.69 kg)
Manfrotto 035C Universal Super Clamp with ratchet handle
Product Highlights :
- Load capacity 15.0 kg
- Clamp range min round tube 55 mm
- Clamp range max round tube 13 mm
- Color black
- Attachment (bottom) 16mm hexagonal M5 & 1/4" threads
Nikon ME-1 Stereo Microphone
Product Highlights :
- Create higher-quality audio than your camera can alone with this stereo mic.
- Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
- Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
- Reduces vibration noise during autofocus.
- Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
- Specifications:
- Type: Back-electret condenser microphone (unidirectional)
- Channels: 2 - stereo
- Frequency Response: 70-16,000Hz
- Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
- Signal to Noise Ratio: 60dB or more
- Output Impedance: 2.2k Ohm or less
- Power: Supplied by camera
- Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
- Filter: Controlled by low-cut filter switch (ON/OFF)
- Compatible Models:
- D4, D3S, D800-series, D600, D300S
- D7100, D7000, D5200, D5100, D3200
- CoolPix P7700, P7100, P7000
- Nikon V1, V2
- Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones
Package Contents :
- Nikon Stereo Microphone ME-1
- Windscreen
- Carrying Case
Warranty :
- Miyamondo 1-Year Warranty
Manfrotto MK190XPRO4-3W 190 Aluminium 4-Section Tripod with Head
Product Highlights :
- Shoot from new perspectives thanks to the 90° column system
- Effortless setup thanks to the Quick Power Lock
- Add an accessory via the East Link
- Leg angle selectors guarantee smooth movement
- Accurate framing on 3 axes thanks to the XPRO 3Way head
- Specifications:
- Load Capacity : 6kg
- Maximum Height : 173 cm
- Minimum Height : 8 cm
- Weight : 3.1 kg
- Material : Aluminum
- Quick Release : Yes
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
Warranty :
- This product is covered by 2-Year Manfrotto Warranty
Manfrotto MK190X3-2W 190X Aluminium 3-Section Tripod with XPRO Fluid Head
Product Highlights :
- Two Tilt Drag Settings
- Fixed Pan Drag
- Separate Pan and Tilt Locks
- QR Plate
- 3 Section, 2 Stage Aluminum Legs
- Four Pre-Set Locking Positions
- Easy Link Accessory Port
- Specifications:
- Load Capacity : 7kg
- Maximum Height : 170 cm
- Minimum Height : 19 cm
- Folded : 69 cm
- Weight : 2.7 kg
- Material : AdaptoTechnopolymer , Aluminum
- Quick Release : Yes, 200PL
- Camera Mount Thread Size : 1/4"-20
- Tripod Mount Thread Size : 3/8"-16
- Bubble Level : Yes
- Independent Pan Lock : Yes
- Independent Tilt Lock :Yes
Warranty :
-
This Product is Covered by 2-Year Manfrotto Warranty
Manfrotto 230 Tripod Snow Shoes
Product Highlights:
-
The Manfrotto 230 (3255) is a set of 3 5.5" diameter (14cm) All Weather Tripod Shoes.
-
Snap these all-weather shoes onto your tripod legs and be set for snow, sand or other irregular surfaces.
-
Shoes attach easily and provide the stability needed.