Manfrotto MKBFRC4-BH BeFree Carbon fibre Travel Tripod with Ball head (Black)

Product Highlights :

• Shoot from new perspectives thanks to the 90° column system
• Effortless setup thanks to the Quick Power Lock
• Add an accessory via the East Link
• Leg angle selectors guarantee smooth movement
• Accurate framing on 3 axes thanks to the XPRO 3Way head
• Specifications:
  - Load Capacity :  6kg
  - Maximum Height : 173 cm
  - Minimum Height : 8 cm
  - Weight : 3.1 kg
  - Material : Aluminum
  - Quick Release : Yes
  - Camera Mount Thread Size : 1/4"-20
  - Tripod Mount Thread Size : 3/8"-16
  - Bubble Level : Yes
  - Independent Pan Lock : Yes
  - Independent Tilt Lock :Yes

Warranty :

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• Compact, light and portable tripod ideal as a travel companion.
• A high quality tripod that fits into carry-on luggage and backpacks.
• Maximum Height: 144cm
• Minimum Height: 34cm
• 4 Leg Sections
• Independent Leg Spread
• Quick Release Ball Head
• Weight: 1.4kg
• Load Capacity: 4kg

Warranty :

• This product is covered by 2-Year Manfrotto Warranty

Product Highlights :

• Supports 35.27 lb
• Magnesium Alloy Construction
• Weighs Just 1.76 lb
• Hydraulic Locking System
• Includes Quick Release
• 3 Spirit Levels
• -90 to 90 Degree Tilt Range
• Specifications:
  Construction  Magnesium alloy
  Tripod Attachment  3/8"-16
  Friction Control  Yes
  Independent Pan Lock  Yes
  Lateral Tilt  -90° / 90°
  Panoramic Rotation  360 Degrees
  Quick Release  Yes, with secondary safety system
  Camera Plate  1/4"-20
  Spirit Level  Yes, x3
  Load Capacity  35.27 lb (16 kg)
  Height  5.12" (13 cm)
  Weight  1.76 lb (0.8 kg)

• This Product is Covered by 2-Year Manfrotto Warranty

Product Highlights: 

• The Manfrotto 577 Rapid Connect Adapter gives you the freedom to remove the camera from the head without detaching it from the plate
• It includes the 501PL plate and is compatible with the 501PLONG camera plate as well
• Change supports without disassembling your camera
• Includes a safety lock for extra security
• Quick release system for fast and easy set up
• Easily pair with a variety of camera plates
• This clever adapter includes universal screws
• Specifications:
  - Weight : 0.28Kg
  - Material : Aluminium
  - Height : 2.35cm
  - Length : 10cm
  - Width : 9cm

Product Highlights :

• Create higher-quality audio than your camera can alone with this stereo mic.
• Designed for use with a digital SLR camera with a 3.5 mm (diameter) stereo mini-pin jack.
• Equipped with a cable stop which holds the cable in place to prevent noise from being recorded with accidental contact with the cable.
• Reduces vibration noise during autofocus.
• Low-cut filter reduces wind noise and other low-frequency noise not blocked by the wind screen.
• Specifications:
• Type: Back-electret condenser microphone (unidirectional)
• Channels: 2 - stereo
• Frequency Response: 70-16,000Hz
• Sensitivity: -42dB /- 3dB / 0dB=1V/Pa, 1kHz
• Signal to Noise Ratio: 60dB or more
• Output Impedance: 2.2k Ohm or less
• Power: Supplied by camera
• Plug: Gold-plated, L-shaped stereo mini-pin plug (3.5mm)
• Filter: Controlled by low-cut filter switch (ON/OFF)
• Compatible Models:
  -  D4, D3S, D800-series, D600, D300S
  - D7100, D7000, D5200, D5100, D3200
  - CoolPix P7700, P7100, P7000
  - Nikon V1, V2
  - Any other Nikon DSLR or CoolPix cameras equipped with a 3.5mm mic jack for extenal microphones

Package Contents :

• Nikon Stereo Microphone ME-1
• Windscreen
• Carrying Case

Warranty :

• Miyamondo 1-Year Warranty